FV-EU

Tested to VDI 6022

With TROXNETCOM as an option

CE compliant according to European regulations

FV-EU

FIRE PROTECTION VALVES FOR SUPPLY AND EXTRACT AIR

Circular fire protection valve for the isolation of duct penetrations between fire compartments; suitable for supply air and extract air systems. They also satisfy ventilation requirements

Nominal sizes Ø 100, 125, 160, 200 mm
For installation in walls and ceilings
Low differential pressure and sound power level
Integration into the central BMS with TROXNETCOM

Optional equipment and accessories

Electric limit switch
Extension piece
Trim ring, circular or square

General Information

Application

Fire protection valves of Type FV-EU, with CE marking and declaration of performance, for the isolation of duct penetrations between fire compartments in the event of a fire
To prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments

Special characteristics

Declaration of performance according to Construction Products Regulation
Classification to EN 13501-3, up to EI 120 (v_e, h_o, i ↔ o) S
Building inspectorate licence Z-56.4212-991 for fire resistance properties
Complies with the requirements of EN 15650
Tested to EN 1366-2 for fire resistance properties
Hygiene complies with VDI 6022 part 1 (07/2011), VDI 3803 (10/2002), DIN 1946 part 4 (12/2008), and EN 13779 (09/2007)
Corrosion protection according to EN 15650 in connection with EN 60068-2-52
Closed valve cone air leakage to EN 1751, class 2
Low differential pressure and sound power level
Any airflow direction

Classification

Class of performance to EN 13501-3, up to EI 120 (v_e, h_o, i ↔ o) S

Nominal sizes

Ø100, 125, 160, 200 mm
L: 150 mm

Variants

With fusible link
With fusible link and limit switch

Attachments

Limit switch for capturing the valve position
Network module for the integration with AS-i networks

Accessories

Mortar-based installation

Trim ring, circular
Trim ring, square
Flexible connectors
Extension piece

Construction features

Adjustment device for large or small air volumes
Valve cone with bayonet fixing
Integration into the central BMS with TROXNETCOM

Materials and surfaces

Installation subframe, spigot and valve disc made of sheet steel
Installation subframe and spigot with stove-enamelled finish, black
Exposed surface of valve disc powder-coated RAL 9010
Valve cone made of special insulation material
Seal made of polyurethane
Attachments made of galvanised steel
Increased corrosion protection due to powder-coated casing

Standards and guidelines

Construction Products Regulation
EN 15650:2010 Ventilation for buildings – fire dampers
EN 1366-2-1999 Fire resistance tests for service installations – Fire dampers
EN 13501-3:2010 Fire classification of construction products and building elements
EN 1751:1999 Ventilation for buildings – Air terminal devices

Maintenance

The functional reliability of the fire protection valve must be tested at least every six months; this has to be arranged by the owner of the ventilation system; functional tests must be carried out in compliance with the basic maintenance principles stated in EN 13306 and DIN 31051. If two consecutive tests, one 6 months after the other, are successful, the next test can be conducted one year later.
Fire protection valves must be included in the regular cleaning schedule of the ventilation system
For details on maintenance and inspection refer to the installation and operating manual

Information technique

Schematic illustration of the FV-EU with extension piece and limit switches 00140430_0

① Installation subframe (subframe and fixing material are supplied separately)
② Spigot
③ Valve cone
④ Flat springs
⑤ Fusible link 72 °C
⑥ Spring (for closure)
⑦ Seal
⑧ Valve disc with seal
⑨ Adjustment device (position 1: large air volume; position 2: small air volume)
⑩ Bayonet fixing
⑪ Extension piece
⑫ Sheet metal cover
⑬ Limit switch, indicating OPEN
⑭ Limit switch, indicating CLOSED

Functional description

In the event of a fire, fire protection valves shut automatically to prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments.

In the event of a fire, the valve is triggered at 72 °C by a fusible link. The release mechanism is accessible and can be tested from the outside.

Nominal sizes	Ø100, 125, 160, 200 mm
Casing length	150 mm (300 mm with extension piece)
Release temperature	72 °C
Operating temperature	0 to 50 °C
Volume flow rate range	Extract air up to 400 m³/h or supply air up to 210 m³/h

Volume flow rate at differential pressure Δpst < 35 Pa (supply air)

L_WA [dB(A)]	25		35		45		25		35		45
Nominal size	V
mm	l/s	Pa	l/s	Pa	l/s	Pa	m³/h	Pa	m³/h	Pa	m³/h	Pa
100	15	22	21	42	29	82	55	22	75	42	105	82
125	20	19	29	39	40	72	73	19	105	39	143	72
160	19	13	28	28	39	57	68	13	100	28	142	57
200	24	14	33	28	49	60	85	14	120	28	175	60

Volume flow rate at differential pressure Δpst < 35 Pa (extract air)

L_WA [dB(A)]	25		35		45		25		35		45
Nominal size	V
mm	l/s	Pa	l/s	Pa	l/s	Pa	m³/h	Pa	m³/h	Pa	m³/h	Pa
100	17	18	25	38	35	75	62	18	90	38	126	75
125	13	5	27	21	58	99	48	5	97	21	210	99
160	21	11	36	32	58	83	75	11	130	32	210	83
200	24	10	39	27	67	81	85	10	140	27	240	81

Fire protection valve for the isolation of duct penetrations between fire compartments. For use in supply air and extract air systems; with two-stage adjustment device for adjusting the air volume.

Ready-for-operation unit, which includes a fire-resistant valve cone and a release mechanism.

Tested for fire resistance properties to EN 1366-2, with CE marking and declaration of performance according to the Construction Products Regulation.

For mortar-based installation into solid walls and ceiling slabs, and into lightweight partition walls with metal support structure and cladding on both sides.

Casing length 150 mm (300 mm with extension piece)

For the connection to ducts made of non-combustible or combustible materials.

Thermal release at 72 °C.

Special characteristics

Declaration of performance according to Construction Products Regulation
Classification to EN 13501-3, up to EI 120 (v_e, h_o, i ↔ o) S
Building inspectorate licence Z-56.4212-991 for fire resistance properties
Complies with the requirements of EN 15650
Tested to EN 1366-2 for fire resistance properties
Hygiene complies with VDI 6022 part 1 (07/2011), VDI 3803 (10/2002), DIN 1946 part 4 (12/2008), and EN 13779 (09/2007)
Corrosion protection according to EN 15650 in connection with EN 60068-2-52
Closed valve cone air leakage to EN 1751, class 2
Low differential pressure and sound power level
Any airflow direction

Materials and surfaces

Installation subframe, spigot and valve disc made of sheet steel
Installation subframe and spigot with stove-enamelled finish, black
Exposed surface of valve disc powder-coated RAL 9010
Valve cone made of special insulation material
Seal made of polyurethane
Attachments made of galvanised steel
Increased corrosion protection due to powder-coated casing

Technical data

Nominal sizes: Ø100, 125, 160, 200 mm
Casing length 150 mm (300 mm with extension piece)
Release temperature: 72 °C
Operating temperature: 0 to 50 °C
Volume flow rate range: Extract air up to 400 m³/h or supply air up to 210 m³/h

Type
FV-EU Fire protection valve

Country of destination
DE Germany
Other destination countries upon request

Nominal size [mm]
100
125
160
200

Accessories
No entry: none
R Trim ring - circular
Q Trim ring - square

Attachments
Z04 – Z07

Téléchargements

Information produit

Clapets coupe-feu FV-EU

Clapets coupe-feu FV-EU 1.5 Mo pdf
Technical leaflet

09/2015 Type FV-EU 1.7 Mo pdf

Certificats

Declaration of hygiene conformity

FV-EU_HC_2024_05_DE_en Type FV-EU 1.1 Mo pdf

Manuels d'utilisation

.pdf

FV-EU_IOM_A00000029542_V2_2024_02_FR_fr Manuel d'installation et de fonctionnement 660 ko

En cliquant sur ce bouton, vous nous autorisez à vous offrir une expérience de navigation et d'achat de qualité sur notre site web. Ces cookies comprennent ceux qui sont nécessaires au fonctionnement du site et au contrôle de nos services et applications, ainsi que ceux qui sont utilisés uniquement à des fins statistiques, pour des paramètres de commodité ou pour afficher un contenu personnalisé. Vous pouvez décider quelles catégories vous souhaitez autoriser et vous pouvez ajuster les paramètres d'utilisation des données en fonction de vos propres besoinsS. Veuillez noter que, selon les paramètres que vous avez sélectionnés, toutes les fonctionnalités de la page peuvent ne pas être disponibles. Vous pouvez modifier votre sélection à tout moment.

NÉCESSAIRE D’UN POINT DE VUE TECHNIQUE

Ces cookies sont nécessaires au bon fonctionnement de notre site Internet et ne peuvent pas être désactivés. En règle générale, ces cookies ne sont définis qu'en réponse aux actions que vous avez entreprises, comme la définition de vos préférences de confidentialité ou la préparation de votre panier. De plus, des fonctionnalités ou supports liés à la sécurité via un webchat dédié sont intégrés, y compris tous les cookies de session de TROX définis une fois que vous vous êtes connecté en tant que client. Vous pouvez configurer votre navigateur pour bloquer ces cookies ou vous en informer. En conséquence, cependant, certaines zones du site Web peuvent ne pas fonctionner comme prévu.

STATISTIQUES ET ANALYSE DE SITE WEB

Ces cookies permettent de collecter des données à des fins de statistiques et d'analyses afin que TROX puisse mesurer les performances des sites Web visités, identifier les problèmes techniques et trouver des points de départ pour l'optimisation. Ils peuvent être définis par nous ou par des tiers dont nous utilisons les services sur nos sites. Les utilisateurs aident également à identifier, par exemple, quelles pages sont utilisées le plus fréquemment ou rarement ou comment les gens naviguent entre les pages Web. Toutes les informations utilisées par des tiers sont agrégées et anonymisées.

FV-EU

FIRE PROTECTION VALVES FOR SUPPLY AND EXTRACT AIR

General Information

Information technique

Téléchargements

Information produit

Clapets coupe-feu FV-EU

Technical leaflet

Certificats

Declaration of hygiene conformity

Manuels d'utilisation

.pdf

NÉCESSAIRE D’UN POINT DE VUE TECHNIQUE

STATISTIQUES ET ANALYSE DE SITE WEB

COMMODITÉ ET PERSONNALISATION

POUR LA MEILLEURE EXPÉRIENCE TROX POSSIBLE