Circular spigot with lip seal
Circular spigot with lip seal
Internal measuring tube to sample particles for measurement
Test groove, detail
Pressure measurement point, detail
Conforms to VDI 6022
Particulate filter modules for ceilings as a final filter stage with Mini Pleat filter panels for the separation of suspended particles. Use in laboratories, medical areas, or production rooms in the pharmaceutical and food industries.
Application
▪ Particulate filter module type TFM for ceiling installation as a final filter stage and for air distribution in clean room technology
▪ Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air.
Classification
▪ Hygiene-conformity according to VDI 6022
▪ Leakage classes: L1 according to DIN EN 1886 and D according to DIN EN 15727
Nominal sizes
▪ B × L [mm]
Useful additions
▪ Mini Pleat filter panels with flat seal or fluid seal
▪ Suitable filter elements to be ordered separately
▪ Assembly kit for screw connection of single casings to ceiling tiles
Special characteristics
▪ Single casings can be flexibly combined into ceiling tiles
▪ Inclusion of filters with flat or fluid seals
▪ High operational reliability due to sealing integrity test facility
▪ Compact construction with internal measuring units
▪ Spigot with lip seal
▪ Easy assembly due to flexible suspension
Construction features
▪ Pre-drilled connection points for easy assembly of several modules one below the other
▪ Special test groove enables filters with flat or fluid seals to be fitted
▪ Clamping mechanism with 2 or 4 fixing points for filter elements (depending on size)
▪ Integrated test device for checking the tightness of the filter
▪ Pressure measurement points to monitor the differential operating pressure
▪ Internal measuring tube to sample particles for measurement
▪ Spigot circular (arrangement at the top)
Materials and surfaces
▪ Casing made of sheet steel, powder-coated RAL 9010 (pure white)
▪ Diffuser face plate made of perforated sheet metal with perimeter return edge, powder-coated RAL 9010 (pure white)
▪ Optional stainless steel construction
Installation and commissioning
▪ Variable suspension
▪ The filter element is mounted by using a clamping mechanism with 2 or 4 fixing points for filter elements (depending on size)
▪ Air terminal device with 4-point fixing
Standards and guidelines
▪ Hygiene meets the requirements of VDI 6022, VDI 3803, DIN 1946 Part 4, ÖNORM H 6021 and ÖNORM H 6020, SWKI VA 104-01 and SWKI 99-3, and EN 16798
▪ Leakage classes: DIN EN 1886, DIN EN 15727
Maintenance
▪ Easy removal of the
This specification text describes the general properties of the product. Texts for variants can be generated with our Easy Product Finder design programme.
Specification text
Particulate filter modules type TFM for ceiling installation as a final filter stage and for air distribution in clean room technology. Individual casings with pre-drilled joints can be combined to form modular ceiling tiles. Fitting of filter elements for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply or extract air. Casing with connection from above through spigot with lip seal. Flexible suspension with variable mounting points. Particulate filter module with special clamping mechanism with 2 fixing points for dimensions 600 × 600 or 4 fixing points for dimensions 600 × 900 and 600 × 1200. The TFM casings are suitable for mounting filters with flat or fluid seals. Casing with integrated sealing seat testing facility; measuring tube inside for sampling for particle measurement; pressure measurement points for monitoring the operating pressure difference. Diffuser face plate made of perforated sheet metal with perimeter return edge, powder-coated RAL 9010 (pure white) with 4-point fixing. Leakage test for each casing.
Special characteristics
▪ Single casings can be flexibly combined into ceiling tiles
▪ Inclusion of filters with flat or fluid seals
▪ High operational reliability due to sealing integrity test facility
▪ Compact construction with internal measuring units
▪ Spigot with lip seal
▪ Easy assembly due to flexible suspension
Materials and surfaces
▪ Casing made of sheet steel, powder-coated RAL 9010 (pure white)
▪ Diffuser face plate made of perforated sheet metal with perimeter return edge, powder-coated RAL 9010 (pure white)
▪ Optional stainless steel construction
| TFM | / | 600 × 900 |
| | | | | |
| 1 | 2 |
| Nominal size | 600 × 900 mm |
| ① | ② | ③ | ④ | ⑤ | ⑥ | |
|---|---|---|---|---|---|---|
| B [mm] | L [mm] | B × H × T [mm] | M | ∅D | O | kg |
| 600 | 600 | 535 × 535 × 78 | 248 | 300 | 22 | |
| 600 | 900 | 835 × 535 × 78 | 313 | 600 | 27 | |
| 600 | 1200 | 1135 × 535 × 78 | 348 | 600 | 34 | |
Condividi pagina
Consiglia questa pagina
Consiglia questa pagina inviando un link via e-mail.
Condividi pagina
Grazie per la tua condivisione!
La tua segnalazione è stata inviata e dovrebbe arrivare a breve.
Contatti
Siamo qui per te
Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +41 26 425 59 00 | Fax: +41 55 250 73 10 | Fax Fribourg: +41 26 425 59 01
Contatti
Grazie per il tuo messaggio!
Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +41 26 425 59 00 | Fax: +41 55 250 73 10 | Fax Fribourg: +41 26 425 59 01
Contatti
Siamo qui per te
Specifichi il suo messaggio ed il tipo di richiesta
Tel.: +41 26 425 59 00 | Fax: +41 55 250 73 10 | Fax Fribourg: +41 26 425 59 01
Contatti
Grazie per il tuo messaggio!
Il tuo messaggio è stato inviato e sarà processato a breve.
Il nostro dipartimento per la gestione delle richieste ti contatterà appena possibile.
Per domande di carattere generale riguardanti i nostri prodotti o servizi, è possibile contattare:
Tel.: +41 26 425 59 00 | Fax: +41 55 250 73 10 | Fax Fribourg: +41 26 425 59 01
